Wind Energy

Raw Water/Pre-Loading Reel Systems provide an effective means of storing, lowering, and retrieving a composite hose at the end of which an ESP (Electrical Submersible Pump) can be attached and run below the ocean surface to deliver seawater to an elevated offshore structure.The systems can be retrofitted to an existing vessel or supplied for new construction.

Tire type linear cable engines are used to deploy and retrieve cables and umbilicals, typically subsea. The tire design is more friendly to the cable and can pass bodies while maintaining tension on the cable. The Marine & Energy containerized design makes for fast mobilization, easy transport and installation; simply tie off to the deck, deliver available power and the system is ready to g..

Reel Power has over 48 years of designing and building specialty winch and winding equipment. Marine winches are available with variable frequency or hydraulic drive systems for over 100,000 lbs of pull. Please share with us your exact requirements and a winch can be offered to best suit your application.

Traction winches are used to hold back and control tension on wire ropes, ROV cable, synthetic rope and wireline. They are often used to control tension for loading material onto a winch that cannot support the high line tensions on lower layers. Otherwise known as dual wheel capstans.

Oceanographic Winches, Towing Winches, Research Winches, Specialized Winches, Traction Winches, Array Winches, Renewable Winches, Dredging Winches, Bow Winches Ocean & Seabed Survey Winches, Specialty Mooring Winches, Aerostat Winches, Seismic winches, Geotechnical Winches(seabed sampling), ROV&nb..

The Re-Reeving machinery is specifically designed for replacing wire rope on your on-shore and offshore cranes.  The machine winds up your old wire rope onto a spool for disposal, then pays out new wire rope with back tension from a reel to yo..